Amari
2x6 Reference AD/DA Converter/USB 3.0 Audio Interface
Amari
Connectivity
Inputs
Analog
1x Stereo Pair balanced on ComboXLR 24dBu max input level
1x Stereo Pair unbalanced on RCA 8,2dBu / 6dBv max input level
Digital
1x AES/EBU up to 192 kHz
1x S/PDIF up to 192kHz
1x TOSLINK up to 96kHz
Sync
1x WC
1x Atomic
Outputs
Analog
1x Stereo Pair balanced on XLR. Output Level: 24dBu max, digital trim available
1x Stereo Pair balanced on TRS. Output Level: 18dBu max, digital trim available
2x Stereo Headphone outs on ComboXLR with individual volume control knobs. Output Power: 1,4 Watts max. Selectable output impedance from -4.6 to 85.3 Ohm available in 17 steps
Headphone outputs are also configurable to drive 1 pair fully balanced headphone set with dedicated volume control
Digital
1x AES/EBU up to 192kHz
1x TOSLINK up to 96kHz
1x S/PDIF up to 192kHz
Bidirectional
1x USB 3.1 on Type-B connector up to 384kHz
Power
DC Power Inlet with lock nut
AD Conversion
2x AK5778 A/D Converter chips
24 bit 384kHz
Input: Full Differential Inputs
S/(N+D): 112 dB (S/N: 124 dB)
THD+N: -109dB
Dynamic Range: 128dB
DA Conversion
8x CS43198 D/A Converter chips
24-bit 384kHz PCM / up to DSD2562 over PCM
Dynamic Range: 138dB
XLR: THD+N: -113dB, DNR: 137dB
TRS: THD+N: -111dB, DNR: 135dB
Clocking
4th Generation 64-bit Acoustically focused clock technology
Sample-rates supported:
AD and DA PCM: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 352.8kHz, 192kHz, 384kHz
DA DSD: 64, 128, 256
Power supply:
18VDC / 0.83A
Wall wart power supply unit (supplied)

